Geometrics Knowledgebase :: Magnetometers

Knowledgebase Home > Support > Troubleshooting > Magnetometers | Glossary | Favorites | Contact | Login

Search the Knowledgebase	Browse by Category
[Advanced Search]

View Articles by Category

There are no sub categories

Magnetometers

There were 3 articles found in this category:

882 will no longer communicate with computer
You will need to test the magnetometer on the dry deck or in your shop. 1.Connect the G882 directly to the junction box and use the black power supply Geometrics provided. 2.Verify operation. If working go to step 4. If the magnetometer is not working, then there is a hardware failure. Th ...
MagMap Work Around for 2007 and 2008 G-858 Data with incorrect time stamps
G-858 magnetometers built prior to January 2001 that have only one RS 232 input will incorrectly store the date and time in recorded survey files. Geometrics have devised two methods of correcting these date and time stamps. You can send your instrument to Geometrics for installation of new fi ...
I receive a message Data Err (data error) on my G-856AX
The data error message can be cleared by pressing erase twice while the error message is displayed. This will clear the error message, erase all data, and reset the clock. If the problem occurs again, especially after removing the "D" batteries, it may need the lithium battery replaced, or poss ...

P: (408) 954-0522 · F: (408) 954-0902 · E: sales@mail.geometrics.com · 2190 Fortune Drive · San Jose, CA 95131 U.S.A.